manualshive.com logo in svg

Manitou 100 SEC 2, Руководство оператора, Страница: 21 / 102

Поделиться
Скачать
Manitou 100 SEC 2 Скачать руководство пользователя страница 21

1-17

H

YDRAULIC

 

- Make any repairs and fix any leaks, including minor ones, immediately.

 

- Do not attempt to loosen unions, hoses or any hydraulic component with the circuit under pressure.

BALANCING VALVE :  It is dangerous to change the setting and remove the balancing valves or safety valves which may be 
fitted to your platform cylinders. These operations must only be performed by approved personnel (consult your dealer).

Ensure that all consumables and replacement parts are disposed of safety, in an environmentally friendly manner.

The HYDRAULIC ACCUMULATORS that can be fitted on your lifting platform are pressurised components; removal of these 

components and their hoses can be a dangerous operation. It should only be performed by accredited personnel (please 
contact your dealer).

E

LECTRICITY

 

- Do not drop metallic items on the battery (between the “Plus” and “Minus terminals”).

 

- Disconnect the battery or batteries before working on the electrical circuit.

 

- The electrical box must only be opened by authorized personnel.

W

ELDING

 

ON

 

THE

 

ACCESS

 

PLATFORM

 

- Disconnect the battery or batteries before welding on the platform.

 

- When carrying out electric welding work on the platform, connect the negative cable from the equipment directly to the part being 

welded, so as to avoid high tension current passing through the alternator or the live ring.

 

- If the platform is equipped with an electronic control unit, disconnect this before starting to weld, to avoid the risk of causing irreparable 

damage to electronic components.

Welding operations on the structure for maintenance or repair operations must only be performed by MANITOU-certified 

personnel. 

W

ASHING

 

THE

 

PLATFORM

 

- Clean the platform or at least the area concerned before any intervention.
- Remember to close and lock all accesses to the platform (cowls…).
- When cleaning with a pressure washer, avoid the articulation joints, and the electrical components and connections.
- If necessary, protect components likely to be damaged, and in particular the electrical components (variable speed drive, charger) and 
connections and the injection pump from penetration by water, steam or cleaning products.
- Dry the electrical components.
- Clean the platform of any fuel, oil or grease trace.
- Grease the shafts. 

FOR ANY INTERVENTION OTHER THAN REGULAR MAINTENANCE, 
CONSULT YOUR DEALER.

647369 

(01/03/2017) 

78/100 

SEC 

2 

/ 120 

SE 

2

Содержание 100 SEC 2







































































































Отзывы:

Нет отзывов