Manitou 100 SEC 2 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 102

Manitou 100 SEC 2 Скачать руководство пользователя страница 18

1-14

G -

S

TOPPING

THE

PLATFORM

SAFETY NOTICE

- Never leave the ignition key in the platform during the operator’s absence.

- Make sure that the platform is not stopped in any position that will interfere with the traffic flow and at less than one meter from the

track of a railway.

- In the event of prolonged parking on a site, protect the platform from bad weather, particularly from frost (check the level of antifreeze),

close and lock all the platform accesses (cowls…).

- Park the lifting platform on a flat surface or on a slight slope of less than 10%.

INSTRUCTIONS

PLATFORMS WITH IC ENGINES

- Before stopping the platform after a long working period, leave the I.C. engine idling for a few moments, to allow the coolant liquid and

oil to lower the temperature of the I.C. engine and transmission.

Do not forget this precaution, in the event of frequent stops or warm stalling of the I.C. engine, or else the temperature of
certain parts will rise significantly due to the stopping of the cooling system, with the risk of badly damaging such parts.

- Stop the I.C. engine with the ignition switch.

- Remove the ignition key.

- Check that all the accesses on the platform are closed and locked (cowls…).

ELECTRIC PLATFORMS

- Remove the ground/platform control selection key.
- Check that all the accesses on the platform are closed and locked (cowls…).
- Set the battery cut-out to the OFF position (ELECTRIC PLATFORM).

647369

(01/03/2017)

78/100

SEC

2

/ 120

SE

2

«
...
16
17
18
19
20
...
»

Содержание 100 SEC 2







































































































Отзывы:

Нет отзывов