press the
button to close the pop-up menu.
5.2.4 SAT/TP Edit
1. Press the red button and select the satellite using
▲
/
▼
buttons on the left. Press
◀
/
▶
button to
move to the transponder on the right. Press red
button to eidt.
2. Select Delete, Edit or Add from the popup window.
(The satellite and transponder cannot be deleted if
the channels of the selected satellite have already
been Downloaded)
3. If you select Edit or Add a popup window appears. Edit the parameters as desired
using 0 ~ 9 buttons. Then press the
button the changes will be saved.
5.3 Option
5.3.1 TV Output
1. Select the TV output options using the
▲
/
▼
/
◀
/
▶
buttons.
2. If you press the
button, it will exit the menu
and save the changes.
TV Type: Select your TV type (PAL, NTSC,
PAL/NTSC).
SCART: Select output signal to your TV (RGB, CVBS, S-VIDEO).
TV Screen: Select the screen format of your TV (4:3, 4:3 Letter Box, 16:9)
RF CH Number: Set the RF output channel (audio and video signal to your TV).
Default is set to channel 64.
RF Output Mode: Select RF audio output Mode (PAL B/G, PAL D/K, PAL I for PAL
standard)
AC3: If you set it to enable, you can listen to the audio in Dolby-Digital when
connected to AC-3 decoder via the S/P DIF output.
5.3.2 Language
1. Select the language options using the
▲
/
▼
/
◀
/
▶
button
2. Press the
button to save the selected
language
Display: Change the language used for the OSD
Menu.
Audio 1-2: Change the audio language that you listen to.