12
1.Select the desired satellite using the
▲
/
▼
button.
2. Press the
button to confirm and go to the
next step.
1. Select LNB Type using the
▲
/
▼
button.
2. Press the
button to confirm and go to the
next step.
1. If you use a DiSEqC 1.0 switch, select DiSEqC
option using the
▲
/
▼
button.
2. Press the
button to confirm and go to the
next step.
1. After all settings are done press the
button to
start scanning.
Menu help
Previous Step: If you want to go back to the
previous step, press the red button and then you
can reset options.
Cancel and Exit: If you want to skip 'First
Installation', press the Exit button.
If you have a motorized dish and/or you want to use of the detailed setup procedure,
please refer to the following installation part in 5.2.