5.2 Installation
5.2.1 Dish
1. Press the Menu button to display the main menu.
2. Press the
button on the sub menu. The password
pop-up window appears. All sub menus such as Dish,
Auto Scan, Manual Scan, and SAT/TP Edit on the
Installation are locked by password. The default
password is "0000".
Use the
▲
/
▼
buttons to move up or down in this menu. In any item, such as Dish,
Satellite, Transponder etc use the
◀
/
▶
buttons, to enter or to change the settings.
Dish
1. Press the
◀
/
▶
button, the right screen shows the
pre-selected 32 satellites list
.
2. Select the desired satellite, and press the
button.
Satellite column will show the selected Satellite name.
If you can't find the desired satellite, select any
satellite and press the
button.
Satellite
1. Press the
◀
/
▶
button when you are on Satellite
column to display the full satellite list. Select a satellite
and press the
button to replace the
Current satellite.
Transponder
1. Press the
◀
/
▶
button, to display the transponder list.
2. Press the
button to select a transponder form the
selected satellite. If you change the satellite the
transponder list will change accordingly.
LNB Power
1. Select one of the LNB Power types using the
◀
/
▶
button. Select 13/18V normally or if the distance
between antenna and receiver is greater than 60m,
you can select LNB Power value as 14/19V.