background image

Valued Customer,

Thank you and congratulations on your purchase of the Chameleon Manual Textile Screen Printing
System.

The new, easy change Chameleon is clearly the most versatile, cost effective manual press available
today. The rigidly built Chameleon features a revolutionary duo deck design (Patent No. 5,845,569) that
is engineered for today’s production demands while providing the expendability needed to meet
tomorrow’s challenges.

The purpose of this manual is to help guide, and inform employees in the proper procedures required
for assembly, operation and preventive maintenance of your new Chameleon. Please take a moment
to review the information in the manual before you begin your first production run.

Should it be needed, our worldwide network of Technical Service and Support Representatives are as
close as your telephone. During normal business hours call 1-630-858-6101. During weekends or hol-
idays call our 24 hour Emergency Service Hot-Line at 1-630-462-4715 for technical support.

On behalf of all of us here at M&R, thank you for selecting us as your equipment supplier.

Michael J. Sweers
Director of Technical Services
M&R Printing Equipment, Inc.

M

&

R

Pr

inti

ng Equipme

nt,

In

c.

W

o

rld

w

id

e

Technical Servi

ce

N

et

w

o

rk

Содержание Chameleon CHAM1-4-4































Отзывы: