M&M E107C, Инструкция по эксплуатации

Страница: 23 / 28

Malfunction judgement and solution
Malfunction judgement and solution
Malfunction
Leakage in flushing
assembly
Seat temperature is
too low
Nozzle extended too
slowly
Nozzle not extend out
but only water out
Low water flow
The operation panel
indicator is off
Night light is off
Seat heating function is
not turned on
No user seating detected
Low inlet water pressure
Water temperature
exceeds 43 degrees
Insufficient rotation of the
handle
Filter clogged
No power or leakage
protection switch is not
closed
The night light switch is
turned off
Clean the filter at the inlet connection
The handle is not screwed
back to the stop position Turn the handle back to the stop position
Remove impurities in the filter of the water
pipe, or use a higher water pressure source
Low inlet water pressure
Remove impurities in the filter of the water
pipe, or use a higher water pressure source
Ensure that the user is in contact with
the sensing position
Re-plug the plug, and press the "Reset" key
of the leakage protection, and observe
whether the indicator light is on
Turn on the night light function on the
operation panel
Increase the angle of turning the handle
Turn on the seat heating function
Turn off the warm water on the operation
panel, and then turn on the warm water
after a period of time
Reason Solution
21