M&M E107C, Инструкция по эксплуатации

Страница: 16 / 28

Confirmation and pilot run
Confirmation before use
When the human body seat
induction is on, press down / up
the handle to see if the nozzle is
extended normally to start the
women wash / rear wash function.
3.Check panel function
1. Detect power 2. Seat sensor
4.Check flush function
Make sure the power plug is
plugged in tightly. The indicator
light on the plug indicates that
the system is powered on. If the
indicator light is not on, you can
press the reset button on the
plug to power on. After the
power is turned on, the system
emit a beep.
There is a seat sensor in the area
shown in the figure. Only when
the system senses that someone
is seated, the system emits a
beep.
Press the "night light", "seat
temperature", and "water
temperature" on the panel to
see if the related function
indicators are normally on / off.
Open the valve
Open the water inlet valve to provide water for the whole machine
14