Mandik SEDS-L, Техническая документация инструкция

Страница: 3 / 25

Page 3 Version 2022-12-20 SEDS-L - Smoke extraction damper - single
TPM 158/22
I. GENERAL
Description
Damper characteristics
■
CE certified acc. to EN 12101-8
■
Tested in accordance with EN 1366-10
■
Classified E
600
120 (v
e
- i↔o) S1500C
mod
MAsingle acc. to EN 13501-4+A1
■
External Casing leakage class B, Internal leakage min. class 3 acc. to EN 1751
■
Cycling test in class C
mod
acc. to EN 12101-8
■
Certificate of constancy of performance UKCA No. 0832-UKCA-CPR-P1008 & UKNI No. 0832-UKNI-CPR-P1003
■
Certificate of constancy of performance CE No. 1391-CPR-2020/0187
■
Declaration of Perfomance UKCA & UKNI No. PM/SEDS-L/02/22/1
■
Declaration of Perfomance CE No. PM/SEDS-L/01/22/1
■
Hygienic assessment of fire dampers - Report No. 1.6/pos/19/19c
Working conditions
■ Exact damper function is provided under the following conditions
■
maximum air velocity 12 m/s
■
underpressure max. -1500 Pa or overpressure max. 500 Pa
■ Dampers are installed with the horizontal or vertical axis of the blades.
■
Dampers are intended for installation on air ducts and in/onto the walls where in the case of wall installation, this wall
with damper does not have fire resistance and therefore does not separate two fire compartments.
■ Dampers are suitable for systems without abrasive, chemical and adhesive particles.
■
Dampers are designed for macroclimatic areas with mild climate according to EN 60 721-3-3.
■
Temperature in the place of installation is permitted to range from -20°C to +50°C.
■
The Damper can be fitted with a grille.
Smoke extraction dampers - SEDS-L are shutters in smoke
ventilation system. Dampers are designed to remove heat
and combustion products (e.g. smoke) from single fire comp-
artment. In the event of fire the Smoke and Fire ventilation
system opens the damper in the affected section which
removes combustion products and heat from this section.
The damper blade is controlled by electrical actuating mecha-
nism.
The dampers can be installed in various duct sizes with
respect to the field of direct applications according with EN
1366-9.
The field of direct applications based on tests results is
acceptable according to EN 1363-1, part A.1 and A.2, EN
1366-2, part 13 and EN 1366-10, part 9.
Damper SEDS-L