www.mc-techgroup.com Temperature controller 701 | 1.01.00
7
6
INTRODUCTION
The digital electronic temperature controller 701 from serial no. 2009143 (valid from: September 2020) is the further
developed version of the previous temperature controller.
The digital electronic temperature controller
701
is used for the simple temperature control. It is designed in a
compact construction and is suitable for mounting on top hat rails. Dimensions (H x W) are 90 x 22.5 mm [≈ 3.5” x
0.9”].
7
APPLICATION
The electronic temperature controller
701
is especially suitable for the regulation of electrically heated
M&C
sample
lines series
3/4/5-N/M/H
and
PSP-4M (-W)
with a contact rating of up to 10 A. Equally, it can be used for regulation
of the heating or cooling of other devices.
8
TECHNICAL DATA
Temperature Controller Type
701
230 V
701
115 V
Part No.
01B8240
01B8240a
Temperature control range
Adjustable in the range of -200 to +600 °C [-328 to +1112 °F],
adjusted at works to 0 to +200 °C [32 to 392 °F]
Contact rating
250 V AC/10 A ohmic resistance, change-over contact
Kind of regulation
Two-step regulator
Temperature sensor input
PT100 DIN; 2-conductors with identification of sensor short-circuit/
break
protection
Ambient temperature
0 to +55 °C [32 to 131 °F], in case of close-to-close mounting 0 to +40 °C
[32 to 104 °F]
Storage temperature
-40 to +70 °C [-40 to 158 °F]
Switching hysteresis
Adjusted at works to 5 °C [41 °F]
Accuracy of control
PT100: ≤ ±0.25 %
from final value of measuring range
Thermocouple: ≤ ±1 % from final value of measuring range
Electrical connection
Terminals 2.5 mm
2
Mains voltage*/
Power consumption
230 V, +10/-15 %, 48-63 Hz 2 VA
115 V, +10/-15 %, 48-63 Hz 2 VA
Mounting type
Rail mount housing, top hat rail sizing: 35 x 7.5 mm [≈ 1.4” x 0.3”] according
to DIN IEC 60715
Housing protection
IP 20 EN60529
Housing material
Polycarbonate
Dimensions (H x W x D)
90 x 22.5 x 62 mm [≈ 3.5” x 0.9” x 2.4”]
Weight
110 g [≈ 0.24 lb]
Side altitude
Maximum 2000 m [≈ 6561.7 ft] above sea level
Mounting position
Vertical, c
lose mounting permitted
Climate resistance
≤ 85 % rel. humidity annual average without condensation
Electrical safety
DIN EN 61010 Part 1 over voltage category III, contamination degree 2
Electromagnetic compatibility
DIN EN 61326-1, DIN EN 50121-1/50121-3-2
Interferences
Class B
Resistance to jamming
Industrial requirement
Indications
Dot-Matrix-LCD display with 64 x 80 pixels
