Man D2862 LE423, Руководство по эксплуатации

Страница: 13 / 132

Safety regulations
13
D
Avoid air movements (any swirling of dust when starting engines)
D
The area of the still closed fuel system must be cleaned and dried with the aid of com­
pressed air
D
Remove detached particles of dirt such as paint chippings and insulation material with a
suitable extractor (industrial type vacuum cleaner)
D
Cover areas of the engine compartment from which dust particles could be detached
with clean foil
D
Wash your hands and put on clean work clothes before starting the disassembly work
When carrying out the work it is essential to comply with the following measures:
Risk of damage from penetration of dirt!
D
When the clean side of the fuel system has been opened it is not permissible to use
compressed air for cleaning
D
During assembly work loose dirt must be removed with the aid of suitable extractors (in­
dustrial type vacuum cleaners)
D
Use only fluff‐free cleaning cloths on the fuel system
D
Clean tools and working materials before starting to work
D
Only tools without any damage may be used (cracked chrome coatings)
D
When removing and installing components do not use materials such as cloths, cardbo­
ard or wood since these could shed particles and fine fibres
D
If any paint chips/flakes off when connections are loosened (from possible over‐coating)
these chippings must be carefully removed before finally loosening the screw connec­
tion
D
The connection openings of all parts removed from the clean side of the fuel system
must be
immediately closed up with suitable caps/stoppers
D
These caps/stoppers must be packed protected from dust prior to use and after being
used once they must be disposed of
D
Following this all the components must be carefully stored in a clean, closed container
D
Never use used cleaning or testing liquids for these components
D
New parts must not be removed from their original packing material until directly before
use
D
Work on removed components may be carried out only at a workplace specially equip­
ped for it
D
If removed parts are shipped always use the original packing material of the new part