TO ATTACH YOUR MONKEY MOMETER PRO:
Loosen the large nut at
the bottom of the
Monkey
MOMETER PRO
and remove it.
Feed the cords through
the hole at the top of
your stand one at a time
until all are through.
Tighten the nut as much as
you can by hand. If you like,
you can tighten further with
a large adjustable wrench.
Feed the power cable
through the bottom mail slot on
one of the back plates.
Then feed the cable up
though hole between the posts
and connect it to the
Monkey
MOMETER PRO’S
power cable.
Feed the chords through
the spacer ring and large nut.
STEP 1
STEP 2
STEP 3
STEP 4
Affix the two back plates
using your remaining bolts.
STEP 5
STEP 6
monkeyvision.com.au
