EN
17
Important!
The vibration value changes according to the area of application of the electric tool
and may exceed the specified value in exceptional circumstances.
CLEANING AND MAINTENANCE
Always pull out the mains power plug before starting any cleaning work.
1) Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust as
far as possible. Wipe the equipment with a clean cloth or blow it with compressed
air at low pressure.
• We recommend that you clean the device immediately each time you have
finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use
cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
2) Maintenance
There are no parts inside the equipment which require additional maintenance.
REPAIRS
Only use accessories and spare parts recommended by the manufacturer. If the
equipment should fail some day in spite of our quality controls and your maintenance,
only have it repaired by an authorized electrician. If the supply cord of the appliance is
damaged, this has to be done by the manufacturer or his agent or electrician in order
to avoid a safety hazard.
ENVIRONMENTAL PROTECTION
End of life electrical equipment must not be placed in household waste. Please take
it to a return point. Find out about your nearest return point from your council or
sales outlet.
