Mamiya Power Winder II RZ, Инструкция по эксплуатации

Страница: 6 / 6

6. When all the film has been exposed, 10 frames for 120 film and 20 frames for 220 film, the
winder will automatically wind the film on the take-up spool, and then stop.
 Continuous exposures can be made by holding down the camera’s Shutter Release Button.
 If a Roll Film Holder with a partially exposed roll of film is attached to the camera and the winder
does not advance the film, press the winder’s Start Button. If the shutter will not fire after
pressing the Start Button, press the Start Button again.
 When the camera’s Release Button Collar is set to Emergency Operation, the winder’s Start
Button must be pressed to advance the film to the next frame.
 If the winder’s Start Button is pressed when the camera’s R-M Lever is set to its ‘R’ position, the
winder may stop after the lever returns to its normal, white square, position. If this occurs, press
the Start Button again.
Using the Power Winder II RZ with RB67 Series Lenses
The winder will immediately start winding the film after pressure is released from the camera’s Shutter
Release Button, even if the shutter is still open.
Therefore, do not release the camera’s Shutter Release Button until the shutter operation has competed.