Mamiya Power Winder II RZ, Инструкция по эксплуатации

Страница: 5 / 6

3. Turn the winder’s Lock Key (A) clockwise to secure the winder to the camera body, and then fold
the Lock Key down into the winder.
 During use, periodically check that the winder is still securely attached to the camera body
by turning the Lock Key clockwise.
Using the Power Winder II RZ with RZ67 Series Lenses
1. Load a Film Insert with a roll of film and align the film’s Start Mark with the Film Insert’s Start
Mark.
 You do not need to advance the film to the first frame, the winder will do that automatically.
2. Place the Film Insert into a Roll Film Holder, and then install the Roll Film Holder on the camera
body.
3. Turn the winder’s Power Switch to its ON position.
4. Push, and then release, the winder’s Start Button, Fig. 7.
 The film will advance to the first frame.
 While the film is advancing, the winder’s Battery Test LED will remain on.
 The camera’s Shutter Release Button will be deactivated until the film is advanced to the first
frame.
5. After the film has advanced to the first frame, press the camera’s Shutter Release Button. The
Power Winder II RZ will advance the film to the next frame, cock the lens’ shutter and move the
camera’s mirror to its down position.