Mamiya 7, Руководство пользователя

Страница: 35 / 35

Prevention of Light Leaks Due To Loose Film
Wending
•
Thread the paper leader on the empty take up spool
so the film will be wound evenly and parallel. This
will prevent the film from winding loosely or over the
edge of the spool, which can cause light leaks and
film fogging.
•
Use your left thumb to press lightly on the paper
leader while advancing winding lever slowly to
assure smooth and tight film take-up on the empty
spool. Advance the film and align the printed arrow
start mark with the small triangle start mark on the
camera. Then close the camera back.
Handling of Exposed Film
•
DO NOT remove exposed film from the camera
under direct sunlight. Find a shaded area or turn
your back to the sun and shade the camera before
you open it.
•
When removing the exposed film, be careful to
prevent it from unraveling on the spool. Gently
tighten the paper trailer, moisten the attached seal,
and secure the film to prevent light leaks.
•
Immediately place exposed film in your camera
case or a bag, away from sunlight.
Setting Start Mark with 220 Roll Film
To assure even frame spacing, and prevent
overlapping, be sure to wind the film up to the printed
arrow start mark, which appears after the dotted line.
DO NOT use the dotted line for a start mark.
33