Mamiya 7, Руководство пользователя

Страница: 25 / 35

Exposure Compensation
The exposure compensator functions in a
number of important ways. It can be used
to correct exposure values (EVs) or the
differences in brightness between a
primary subject and its background
-especially when over or under-exposures
occur. It can also be used when filters are
employed or when engaged in available
light photography - or under high contrast
conditions (i.e. low or high key).
To set, press the compensator lock release
button “A”
,
and move lever “B” to select
the desired EV: graduations are 1 /3 EV.
[When a filter is used]
Whether using the AE or manual mode
simply compensate for the filter exposure
factor as indicated in the table below.
* After using exposure compensation, be
sure to reset to “0”.
Time Exposures
When taking an exposure longer than 4
seconds, set shutter to “B” (bulb). At “B"
the shutter will remain open as long as the
release is pressed down. In order to
prevent camera movement, it is best to
use a cable release and tripod.
When set at “B” the self-timer does not
work.
The cable release can be screwed in the
release socket beside the shutter release
button as pictured above.
23