Mamiya 7, Руководство пользователя

Страница: 21 / 35

Taking Photographs
1. Press the shutter release button when
you have focused and determined
composition.
2. Advance the film by winding the film
advance lever until it stops. (The shutter is
then cocked.)
3. After completing the last exposure, wind
the advance lever several times, until the
film with its backing paper is completely
wound onto the take-up spool. The
advance lever will become easier to
actuate when the film has been
completely wound on the spool.
* When the shutter release button is
pressed and the film is exposed, a red
LED will light on the lower left side of the
viewfinder.
[Unloading the film]
When unloading film, avoid direct
sunlight.
1. Open the back cover.
See page 12.
When the back cover is opened, the
exposure counter will automatically return
to "S" (Start).
2. Push the spool stud releases lever to
the right in order to disengage the spool
from the stud.
3. Simply push the upper rim of the spool
with your index finger as shown to lift up
the other end of the spool.
4. Then the roll of film can be easily
removed from the take-up chamber.
5. Be careful not to let the roll of exposed
film unwind. Be sure to seal it
immediately.
•
Do not advance the film too quickly,
as this might adversely affect film
flatness, or frame spacing.
* To prepare for another roll, remove
the empty spool from the film chamber,
and place it in the take-up chamber.
* Wind the advance lever until it stops.
(Otherwise, a red warning Lamp in the
viewfinder will signal that it is
impossible to press the shutter release
button.)
* To remove the film before exposing
the entire roll, cap the lens and press
the shutter release button and wind the
film onto the take-up spool frame by
frame.
19