background image

132

Viewfinder Information

The viewfinder information bar is located below the image area within the 
viewfinder display. It displays the camera’s exposure mode and values 
etc. It also includes a counter with the number of captures remaining 
on the storage media (see top bar circled left). ‘

99

’ is the maximum 

number displayed. ‘

99

’ continues to be displayed if there are more 

than that remaining on a CompactFlash card. An ‘

E

’ indicates that the 

storage media is full. Users must delete some captures or replace the 
CompactFlash card before continuing (see bottom bar circled left).

Double Exposure Protection

It is not possible to accidently double expose an image by capturing 
one image quickly after another when a Leaf Credo back is used on a 
Hasselblad H1/H2.

Note:

 At the end of an exposure, image information has to be moved 

from the CCD to the processing system. During this short period of time 
the CCD must be protected from light exposure. The Leaf Credo back 
ensures that the CCD is safely cleared of information by disabling the 
Hasselblad camera’s shutter release during this procedure.

Image Orientation

The CCD in the Leaf Credo back is positioned in a landscape orientation. 
However, the Leaf Credo back has an internal sensor that detects when 
it has been rotated. Thus, when the camera is rotated and an image is 
captured in portrait position the image appears correctly oriented on the 
LCD and in the Capture One application. 

Содержание 645DFplus






















































































































































Отзывы: