Mami ECE GROUP II, Быстрое руководство по устранению неисправностей

Страница: 15 / 28

15
CAUTION The shoulder belt should go between the child’s shoulder and neck, the headrest should fi t
the child’s head well.
To adjust the headrest, grasp the adjusting handle (9) on the back of the headrest and pull it up gently.
The headrest will be unlocked.
The height of the headrest can now be adjusted. When the height is adjusted, release the adjusting
handle, the headrest will be locked in the selected position.
Place the child safety seat on the vehicle seat. Place your child in the child safety seat and make sure
that the height of the headrest is well adjusted. If necessary, repeat headrest height adjustment until
the optimum height for your child is reached. (See fi gures 1 and 2)
Backrest adjustment
The child safety seat backrest can be easily adjusted to the position of the vehicle seat. The best pro-
tection is provided when the vehicle seat is in an upright position (e.g. in the case of adjustable seats,
i.e. the front passenger seat).
The backrest of the child safety seat is movable, therefore, it can fi t exactly into the plane of the vehicle
seat. Tilt the backrest backwards until it is in a position adherent to the vehicle seat. (See fi gure 3)
Installation of the child safety seat in the car
Always make sure that:
• all passengers are wearing seat belts
• the child safety seat is always secure, even when the child is not being carried in it
• the backrests of the vehicle seats are locked (the folding rear seat backrest is locked)
• all heavy objects with sharp edges are secured (e.g. on the rear shelf)
Vehicle security
Seat upholstery in some vehicles can be made of delicate materials that can leave marks on the child
safety seat. To protect the seats in your car from dirt and abrasion, place a blanket, towel or a suitably
adapted child safety seat pad underneath the child safety seat.
Installation of a child safety seat for children in weight group II/III, using the vehicle’s 3-point
car safety belt.
IMPORTANT: refer to the vehicle manual to see the location of the anchorage points and other neces-
sary information for mounting the child safety seat in the vehicle.
• Adjust the headrest to your child’s height according to the point “headrest height”
• Place the child safety seat on the vehicle seat. Make sure that the backrest of the child safety seat
adhere fl at to the backrest of the vehicle seat. See point “Backrest adjustment”
• Guide the shoulder belt through the red guide (8) under the headrest
• Place the child in the child safety seat and place the car safety belt in front of the child. Fasten the car
safety belt in the buckle, you will hear a characteristic “click”. Make sure that the belts are not twisted.
• The lap belt should be passed under the armrest through the red lap belt guide (3). The shoulder
belt is placed above the armrest.
• CAUTION! The shoulder belt should not be placed on the red tape, under the armrest.
Tension the vehicle seat belt by pulling a section of the lap belt, then a section of the shoulder belt.
Make sure the lap belt is stretched as low as possible over your baby’s hips, fi ts into the guides and is
buckled up. The shoulder belt should pass between the baby’s shoulder and neck. Make sure the belt
does not press on the baby’s neck. (See fi gures 4 and 5)
EN