– 6 –
ATTACHING THE SEAT
Align the two seat tubes
with the seat connectors
on the frame. Slot the
ends of the seat tubes into
the seat connectors.
Ensure that the front of
the seat faces towards the
front of the swing.
Depress the two spring-
loaded buttons in the seat
tubes and lift the seat into
position. Make sure the
spring-loaded buttons lock
into place through the
holes in the seat
connectors.
The seat should be level
when fitted to the frame.
Align the velcro strips on
the back of the head
support with the velcro
pads on the seat cover and
press them together.
Position the head support
so that your baby’s head is
resting on the middle, top
section of the cushion.
Note
: Use the head
support until your child
can hold their head up
unassisted.
ATTACHING THE HEAD SUPPORT
Seat tube
Seat
connector
