ATTACHING THE PRIMO VIAGGIO CAR SEAT
16
Apply the brakes on the
pushchair then lower the
backrest to its lowest
position,
see page 11
.
Raise the legrest to the
upper position,
see page
10
.
Disconnect the crotch strap
and fold the harness flat
on the seat. Fold back the
fabric flap on the bottom
of the seat to reveal the
two attachment brackets.
Fold the fabric flap in half
over the legrest and use
the velcro pads to hold it
in place.
Raise the attachment
brackets to the vertical
position.
1
Slide the attachment
brackets sideways
towards the centre of the
seat.
2
Rotate them up until they
are vertical.
3
The attachment brackets
will lock in the vertical
position.
Align the centre locking
clips in the car seat with
the attachment brackets.
Push the car seat down
onto the attachment
brackets until it clicks into
place.
Check the car seat
is firmly in place by
attempting to lift it off
.
With the car seat in position
pull the backrest
adjustment strap until
all
of the slack is removed and
the backrest is positioned
firmly against the front of
the car seat.
Attachment
brackets
Velcro
pads
