Malyan M200 V2, Руководство пользователя

Страница: 4 / 20

4

Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet
hands.

Use only in a well-ventilated area. Do not use in close, confined spaces.

Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.

Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.

Unplug this device from the power source when not in use.

Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.

Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body
FEATURES

Single Extruder Head

Can print PLA, ABS, Wood, Copper Fill, Steel Fill, Bronze Fill, and other materials

Open frame design for ease of use and maintenance

Includes memory card with Cura, Repetier-Host, and a sample 3D model

Can print using USB connection, Wi-Fi® connection, or memory card