Malyan M200 V2, Руководство пользователя

Страница: 3 / 20

3
Welcome
Thank you for purchasing M200 V2 3d printer from Malyan! Wish you can enjoy your
time with your imagination! For technical support, please contact us via email at
support@malyansys.com
SAFETY WARNINGS AND GUIDELINES

Be careful not to damage the printing surface on the build plate.

Do not remove the insulating tape on the extruder nozzle.

Take care to avoid touching hot parts, including heat blocks, extruder nozzle,
extruded filament, and the heated build plate.

Keep the printer and all accessories out of reach of children.

Do not remove or disconnect the USB cable when printing from a computer.

Do not pull or twist the black cable at any time.

Do not force or tear anything when during unpacking and setup. This may cause
damage to the printer and/or its accessories.

Do not reach inside the printer during operation.

Always allow the printer and extruded filament to cool before reaching inside.

Ensure that the printer is turned off and unplugged from its power source before
making repairs or performing service.

Do not install this device on an unstable surface where it could fall and cause either
personal injury or damage to the device and/or other equipment.

Do not subject the product to extreme force, shock, or fluctuations in temperature
or humidity.

This device is intended for indoor use only.