MALTEC ML2.240, Руководство по эксплуатации

Страница: 16 / 24

WARNING! The machine shall be
disconnected from its power source by
removing the plug from the socket - outlet
during cleaning or maintenance and when
replacing the machine to another function.
WARNING! Do not use the machine if a
supply cord or important parts of the
machine are damaged, e.g. safety devices,
high pressure hoses, trigger gun.
WARNING! If an extension cord is used, the
plug and socket must be of watertight
construction.
WARNING! Inadequate extension cords can
be dangerous. If an extension cord is used, it
shall be suitable for outdoor use, and the
connection has to be kept dry and off the
ground. It is recommended that this is
accomplished by means of a cord reel which
keeps the socket at least 60mm above the
ground.
WARNING!
In order to avoid a hazard due
to inadvertent resetting of the thermal cut - out,
this appliance must not be supplied through
an external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
Warning symbol: Machine not suitable for
connection to the potable water mains.
WARNING! The machine is intended to be
used at a temperature above o degree.
(Only for machine with power cord of
H05VV - F).
WARNING! To ensure the machine safety,
please only use original spare parts
(including nozzle) from the manufacturer or
approved by the manufacturer. Do not use
the machine before you changed them if
they are damaged.
WARNING! Be care of the danger of the
kickback force on the spray assembly when
opening the trigger gun and grasp the gun
with hands firmly.
WARNING! When the machine is moving
and installing, the machine must be in flat.
When moving the machine, pulling the
handle to move it.
WARNING! Connect to the water supply.
The machines are not suitable for
connection to potable water mains.
Connect the machine to the water supply. (It
can be a water container).
Make sure the inlet water pressure keeps
between 0.01MPa and 0.4MPa.
The inlet pipe should at least 5 M long. Do
not use the pipe if the pipe is damaged.
If you want connect this machine to portable
water mains, you must install a backflow
preventer in the water pipe to prevent dirty
water flow back to the drinking water system.
The backflow preventer shall comply with EN
60335 -2-79 ANNEX AA.
WARNING! Disconnect from the electrical
power supply before carrying out user
maintenance.
If the mains cable is damaged it must be
replaced by the manufacturer, or its service
agent or similarly qualified person to avoid a
hazard.
Connection
1. Attach the high pressure hose to the
pressure water outlet of the machine.
2. Attach the spray handle to the high
pressure hose. Prior to operating the
machine please ensure that the high
pressure hose has been completely uncoiled.
Whilst the machine is in operation the hose
MUST not loop.
3. Mount the nozzle or any other equipment
you want to use.
4. Connect the machine to the water and
power supplies.
INSTALLATION, ELECTRICAL AND
WATER CONNECTIONS
15