MALTEC ML2.240, Руководство по эксплуатации

Страница: 14 / 24

recommend by the manufacturer.
13. Only put the machine on stable place
when using, transportation, assembly,
dismantling. Do not rough handling the
machine when transportation.
14. In any event of accident (e.g. contact
with detergents, rinse with an abundance of
clean water), please always switch off the
machine and pull out the plug from socket
outlet, and Disconnect the connection with
water.
15. The machine is not intended to be
connected to the potable water mains. If
necessary, please use only inlet hose - set
approved by IEC 61770.
Risk of injection or severe injury. Keep
clear of nozzle. Do not
discharge streams at persons. This
machine is to be used only by trained
operators. Always remove lance from gun
before cleaning debris from tip.
• Keep clear of nozzle. NEVER direct high
pressure spray at any person, animal or
self.
• Always wear safety glasses or goggles
and protective clothing when operating or
performing maintenance.
• Never put hand or fingers over the spray
tip while operating the unit.
• Never try to stop or deflect leaks with any
body part.
• Always engage the trigger safety latch in
the safe position even when spraying is
stopped for a moment.
• Always follow detergent manufacturer’s
label recommendations for proper use of
detergents. Always protect eyes, skin, and
respiratory system from detergent use.
WARNING!
SERVICING OF A DOUBLE -
INSULATED MACHINE
In a double - insulated machine, two systems
of insulation are provided instead of
grounding. No grounding means are
provided for a double - insulated machine, nor
should grounding means be added to the
machine. Servicing a double - insulated
machine requires extreme care and
knowledge of the system, and should be
done only by qualified service personnel.
Replacement pars for a double - insulated
machine must be identical to the original
parts. A double - insulated machine is marked
with the words “Double Insulation "or
“Double Insulated.” Machine may also be
marked with symbol shown in Figure 1.
WARNING! Do not use pressure
that exceeds the operating
pressure of any of the parts (hoses, fittings,
etc.) in the pressurized system. Ensure all
equipments and accessories are rated to
withstand the maximum working pressure of
the unit.
WARNING! Explosion hazard.
Never spray flammable liquids or use
pressure washer in areas containing
combustible dust, liquids or vapors.
Never operate the machine in a closed
building or in or near an explosive
environment.
WARNING!
Do not spray electrical
apparatus and wiring.
• Never disconnect the high pressure
discharge hose from the machine while the
system is pressurized. To depressurize
machine, turn power and water supply off,
then press gun trigger 2~3 times.
• Never permanently engage the trigger
mechanism on the gun.
• Never operate the machine without all
components properly connected to the
machine (handle, gun/wand assembly,
nozzle, etc.).
WARNING! Equipment damage.
• ALWAYS turn water supply “ON” before
turning pressure washer “ ON.” Running
pump dry causes serious damage.
• Do not operate the pressure washer with
the inlet water screen removed. Keep
screen clear of debris and sediment.
• NEVER operate pressure washer with
broken or missing parts. Check equipment
regularly and repair or replace worn or
damaged parts immediately.
• Use only the nozzle supplied with this
13