Fitting the debris collection bag (Abb.6)
1. Before fitting the debris collection bag ensure that the Vacuum/Blow selector lever
2. operates smoothly and that it is not obstructed by debris from the previous use.
3. Insert the collection bag to the ejection connection on the housing. Push the
connecting piece of the collection bag directly to the ejection chute until it clicks into
place.
4. Hook the collection bag to the hook on Suction/blowing pipe and the motor housing.
(Abb. 6) disassembly in reverse order.
Fitting the shoulder belt (Abb.10)
The Vacuum-Blower is provided with a shoulder belt If the customer need it
(Abb.10),
this
is attached to the top of the main body of the Vacuum-Blower as below shown . The
shoulder belt is provided to reduce fatigue and aid comfort when using the Vacuum-Blower
and can be worn in a position to suit the operator.
Warning!
Wear the belt never diagonally across the shoulder and chest but only on a shoulder, so
you can quickly remove the device at risk from the body.
Before Starting.
Before starting the Vacuum-Blower plug into the mains supply via the (R.C.D.) and switch
on. Check that the (R.C.D.) is operating correctly.
Starting the Vacuum-Blower.
To start the Vacuum-Blower, ensure that the two intermediate suction/blower tubes
together with the machine body are fitted correctly.
Warning!
Before selecting either the Vacuum or Blow function ensure that the selector lever
operates smoothly and that it is not obstructed by debris from the previous use. Select
either the Vacuum or Blow function using the selector lever on the side of the machine
(Abb.7)
and hold the On/Off switch from
OFF
to
ON
position
(Abb.8)
.
24/39
