Operating instructions
Components and controls
1. Vacuum-Blower Body.
2. On/Off Switch.
3. Vacuum/Blower selector lever.
4. Wheeled suction/blower tube.
5. Collection bag.
6. Cable
Warning!
The Vac-Blower must not be used or switched on until it has been fully assembled.
Assembly (Abb.3 Abb.4 and Abb.5)
1. Fig.3 Slide the wheel sets (5-3) in the suction blower tube (5-2) and make sure that
it fits and is inserted all the way. Then secure it with the included screws.
2. Fig.4 Plug the suction blower tube (5-2) in the middle suction blower tube (5-1).
Make sure that it fits properly and fully inserted. Then secure it with the included
screws.
3. Fig.5 Slide the suction blower tube (5-1) in the suction blow moulded bodies. and
make sure that it fits and is inserted all the way. Then secure it with the two screws
supplied.
23/39
