Maintenance and cleaning
According to the functions of various series of steam cleaner, in order to increase its life-
span, users must follow the daily maintenance and maintenance way.
1. Correctly use the product according to the instruction. After each use, picked up the
power cord.
2. After the appliance is completely cool down, unscrew the safety valve and pour rest
water out of the boiler. Clean and dry the boiler.
3. Put all components which had been cleaned into the carton in sequence. Then
stored it in ventilated dry place.
Eco advices
Type of water to use
You can use normal tap water to fill the tank. Therefore, especially if the water of your city
is very hard, we advise you to mix it with distilled water or use distilled water only.
We advise you to empty the boiler after use in order to not create limestone inside the
boiler.
Do not add anything to the contents of the boiler and do not use water from clothes dryers,
scented or softened water, water from refrigerators, batteries or air conditioners and rain
water. These contain organic waste or mineral elements that become concentrated when
heated and cause spitting, brown staining or premature wear to the boiler. Use of these
types of water will negate the guarantee provided with the product.
Steam cleaner cleaning
Clean often the steam cleaner in order to keep the function performance following the
instructions of the Maintenance and cleaning chapter.
We advise you to never use abrasive sponge to clean your steam cleaner
Clean fully your steam cleaner after every 10 uses.
Trouble shooting
PROBLEM
POSSIBLE REASONS
SOLUTIONS
There is no steam
No power
Verify that the socket outlet is
operating and if plug in already
Use the unit without water
filled
Fill water (see USE)
There is not enough
steam
Voltage is too low or not
stable enough
Verify that the socket outlet is
operating and if plug in already
water level may be low
Fill water (see USE)
11/18
