Malsch Impulse 300 KL, Инструкция по эксплуатации

Страница: 22 / 36

22 |
Caution ! When positioning the side protection
and raising the side rails, please ensure the
catches lock in properly, and check this. Always
use both hands to adjust the side rails!
Caution ! Activate the low position (Impulse
400 KL) only with the telescopic side rail re-
tracted (Fig. 1)
Side rail (SR) adjustment
1. In the down position, the side rails are located on the
sides of the lying surface which helps stop the mattress
from slipping. (Fig. 1)
2. You can move the side rails to a mid-height position with
a tilting action to raise the side protection. This position
is particularly suitable as a mobility support when moving
the patient.
3. For height adjustment and for maximum height,
the side rail is locked in place by two push buttons
in the inside of the upper section. Use two hands
at the same time to carry out the telescopic adjust-
ment up or down, and avoid any twisting. (Fig. 2)
Do not use force!
4. To lower the telescopic side rail, use the same process
as for raising.
5. To move the side rails back into the down position, press
the catches marked on the lower side rail bar in at the
same time, and tilt. (Fig. 3)
Fig. 1
Fig. 2
Fig. 3