Malsch Impulse 300 KL, Инструкция по эксплуатации

Страница: 25 / 36

| 25
D E L I V E R Y A N D A S S E M B L Y
Betten Malsch GmbH clinical beds are generally delivered fully
assembled, or assembled by company technicians or author-
ised personnel on site.
The delivery should be checked for completeness and con-
formity.
Any defects or damage should be pointed out to the freight
company immediately, and noted on the delivery document.
Signing of the delivery documents by both parties is obligatory
before commissioning.
If necessary, e.g. for maintenance, simple assembly procedures
can also be performed by professional authorised persons.
We offer comprehensive service instructions
for expert, authorised staff for the assembly of
head / foot boards / lying surfaces as well as
the installation/replacement of lying surface
motors.
After completion of service and maintenance
work, the functionality of electrical units must
be checked.
Assembly bed front / lying surface
- The head / foot boards are removed without tools -
push fit fitting
- Replace the side rail and lying surface covers using appro-
priate fitting aids - perform a function test!
Replacing the drive mechanism
- Disconnect the power supply and remove the push fit
fittings
- Reconnect the push fit fittings of the individual units after
replacing the drive.
The manufacturer offers technician training for
maintenance and servicing work on their clinical
beds. A certificate obtained as part of this train-
ing authorises the holder to carry out technical
work independently on the beds.