F I L T E R R E P L A C E M E N T
Empty the water out of the tank ( ).
Remove the used filter ( ) and pulling upwards and out of the tank.
Dispose of the used filter ( ) in the bin for non-recyclable waste.
Remove the new filter from its bag ( ).
Dip the new filter ( ) in the fresh water and stir to remove any air bubbles. Do not use
the rinsing water to make coffee.
Insert the filter ( ) in the housing at the bottom of the water tank ( ), press vertically
on the top of the filter to connect as required.
The filter ( ) must fit in its housing.
Fill the tank with fresh water ( ).
Place a large cup on the strainer grid ( ) and rinse the machine: press the large coffee
button ( ) after inserting the plastic rinsing pod in the machine (supplied with the
machine).
Dispose of the rinsing water: your machine is ready for use.
To reset the filter replacement warning (central blue light ( ) flashes slowly), press briefly
(less than 5 seconds) and simultaneously on the two coffee option buttons ( and ) :
the light will go on.
Key information:
- Store new filters in their original sealed packaging, in a cool dry location away from
direct sunlight
- Only filter cold water
- Clean the tank on a regular basis ( ).
- Periodically replace the filter ( ), every 250 coffees (when the central blue light ( ).
- Never re-use a used filter ( ) dispose of the filter immediately after the 250 coffees.
When can your find a tank filter no. 12 ?
This filter can be ordered via the Malongo on-line shop (www.malongo.com), or purchased
from a Malongo boutique.
6
12
12
12
12
12
6
12
6
10
4
2
3
4
6
12
12
2
23
NoticeEoh-4Trads-FRENESIT-MAJ092021.qxp_Mise en page 1 29/09/2021 16:52 Page 24
