W A R N I N G L I G H T S
- The lights come on and immediately go out in
‘’Blue’’
,
‘’White’’
,
‘’Red’
’ colours
When plugged into the mains power, this confirms that the machine is setting up.
- The coffee option lights ( ) and ( ) flash simultaneously (slowly)
The machine is heating up
- The coffee option lights ( ) and ( ) are ON steady
The machine is ready to make coffee
- Only the light on one of the coffee options ( ) or ( ) is ON steady
The selected coffee option cycle is in progress
- The light on one of the coffee options ( ) or ( ) is flashing rapidly and the central
light is ON steady
Coffee volume programming mode is activated for this button
- The light on one of the coffee options ( ) or ( ) is flashing rapidly and the other lights
are OUT
The flashing button is being programmed
- The central
orange
light ( ) is flashing slowly
The machine must be descaled. Refer to the chapter on how to descale the
machine in these instructions. After descaling, the central light will go out.
- The central
blue
light ( ) is flashing slowly
Water tank filter no. 12 must be replaced. Refer to the chapter on "Filter replacement"
for the machine in this manual. This filter can be ordered via the Malongo on-line
shop (www.malongo.com), or purchased from a Malongo boutique.
After replacing the filter, press the small and large coffee buttons briefly and simultaneously:
the central light will then go out.
- The central
red
light ( ) is flashing rapidly
Your machine has a technical issue. Unplug the machine's power cable from the
mains plug, wait for 3 mn and then replug. If the problem remains,
contact
your distributor to organise a repair and/or replacement:
- The central
blue
light ( ) is flashing rapidly
The machine has been stored at a low temperature (less than 5°C). The machine
must be stored at a higher temperature to de-activate the "low temperature" safety
function and allow the machine to be used.
3
4
3
4
3
4
3
4
3
4
2
2
2
2
21
NoticeEoh-4Trads-FRENESIT-MAJ092021.qxp_Mise en page 1 29/09/2021 16:52 Page 22
