Malone MegaSport MPG550LB, Руководство пользователя

Страница: 8 / 39

3. Identify the hitch end of the tongue by the 3
holes on the left (drivers) side.
TONGUE ASSEMBLY (GROUP 1)
4. Pass the wiring harness (with a plug at each end), into
the open end of the tongue, leaving enough excess at the
front to reach the vehicle. NOTE: MAKE SURE YOUR
PLUG MATCHES THE VEHICLE CONNECTION. IF NOT
REVERSE YOUR WIRING HARNESS NOW.
800-295-0042 ext 215
technical@maloneautoracks.com
7
8. Begin attaching the tongue components with the side frame
rails first, then the tongue down the middle.
Tighten the side rails beginning at the 4th cross member back,
going through both the main frame rail and cross member,
joining them together. Working your way forwards, the side
rails will pinch together at the tongue. You’ll use washers on
front 2 cross members utilizing the larger oval holes.
5. Add the tongue safety bolt at the non-coupler end as pictured.
NOTE: Wires removed for clarity
MALONE
R
technical@maloneautoracks.com
6
800-295-0042 ext.215