Bedpan Washer Disinfector - Energy Saver
Detergent Model With Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 21
Page 5
14 September 2017
Design Parameters
The Malmet Bedpan Washer Disinfector has been designed within the following parameters:
a)
A single bedpan with lid and two urine bottles can be emptied, cleaned and disinfected during each
automatic cycle.
The utensils that can be cleaned in the machine are:-
i)
Standard size bed pans
ii)
Standard commode bowl
iii)
Standard male and female urine bottles
iv)
Most plastic urine bottles including male non-spill and female cervec
v)
Small slipper pan
vi)
Large slipper pan
b)
The cradle is designed to ensure that utensils are not dislodged during the cleaning cycle; the
contents are emptied during door closure.
c)
The chamber and door are self-cleaning and do not permit water or soil to remain after a properly
completed cycle. Steam disinfection and detergent ensures all internal surfaces are totally clean
and safe.
d)
The flush and clean stage:
i)
Removes the soil
ii)
Clears the trap
e)
A complete cycle is completed in approximately four (4) minutes for the 20
Amp Bedpan Washer
Disinfector and six (6) minutes and thirty (30) seconds for the 10 Amp Bedpan Washer Disinfector
Note: Dependant on ambient air temperature.
Note: The first cycle will take longer as the machine has to reach the operating water
temperature to 90°C.
f)
Malmet Door Obstruction Feature
This is factory set to 12Nm ±10%; causing the door to re-open when an obstruction is detected.
This is designed to protect the integrity of the machine and the articles within.
Disconnect power when servicing
