Only use salt specifically designed for dishwashers use!
Every other type of salt not specifically designed for dishwasher use,
especially table salt, will damage the water softener. In case of damages
caused by the use of unsuitable salt the manufacturer does not give any
warranty nor is liable for any damages caused.
Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been
spilled, remaining on the bottom of the machine for any period of time,
which may causecorrosion.
WARNING
1.
Remove the lower basket and unscrew the reservoir cap.
2.
Place the end of the funnel (supplied) into the hole and pour in about 1kg of
dishwasher salt.
3.
Fill the salt container to its maximum limitwith water, It is normal for a small
amount of water to come out of the salt container.
4.
After filling the container, screw back the cap tightly.
5.
The salt warning light will stop being after the salt container has been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing program should
be started (We suggest to use a short program). Otherwise the filter system, pump
or other important parts of the machine may be damaged by salty water. This is
out of warranty.
The salt container is located the lower basket. Please follow the steps below for adding
dishwasher salt:
Loading the salt into the softener
NOTE
:
The salt container must only be refilled when the salt warning light ( )
in the
control panel comes on. Depending on how well the salt dissolves, the salt
warning light may still be on even though the salt container is filled.
If salt has spilled, run a soak or quick program to remove it.
11