46
Removing inner glass (remove the oven door)
For more complete cleaning, the two inner panes of glass can be removed.
Remove the oven door as indicated above, unscrew the 4 mounting screws from the steel
plates C (fig. 5) that block the glass surfaces in position. The glass surfaces can now be
removed by slipping them out.
fig. 5
fig. 6
fig. 7
Carry out the same steps in reverse order to replace the glass surfaces. Take the utmost
care to ensure they are in the right order and are placed the right way round (the clear
glass must be towards the inside and the position of the lettering on the glass surfaces
must be as in (fig. 6). Also make sure the protective gaskets are positioned correctly.
Some models have a glass anchoring clip that must be repositioned correctly (fig.7) by
keeping the clip D against the painted strip on the upper part of the door and inserting
the intermediate glass E and inner glass F into place (as shown in the figure).
Before remounting the door, make sure the glass is firmly secured into place
ATTENTION! THE REMOVAL AND INSTALLATION MUST BE CARRIED
OUT ACCURATELY AND WITH THE HIGHEST CARE IN ORDER TO
AVOID BREAKING THE GLASS.
Warning! Do not remove the hinge locking hooks from their seat when the door is
not mounted in the oven. Do not close the hinges without the weight of the door as it
causes a violent closing of the springs.
Do not rest weights on the door or hang them on the handle, they could damage the
products, creating malfunctions
Moreover, do not use the oven until the oven door has been re-mounted correctly.
