Malloca MDH-02I, Инструкции по эксплуатации и монтажу

Страница: 18 / 72

18
Touch controls
The control panel is equipped with Infrared sensor. They respond to a finger
touch.
To operate the heaters, simply touch the corresponding sensor area(s). Each
time a command is registered, a signal will be heard.
Be sure to touch only the desired sensor area and keep the control panel clean
and clear. Otherwise, the touch controls may not respond, or unintentional com -
mands may be given, even causing the cooktop to switch off automatically (see
“Automatic Safety off”).
User interface initial calibration
The user interface has implemented an initial keyboard calibration focused to
adapt the sensibility of the keys, to the final mechanical, environmental and user
conditions.
Anytime the Cooktop is plugged or there is a power failure that generates a reset
in the user interface, the first time the Key lock is touched the sensitivity of the
keyboard is
readjusted. This first touch of the Key Lock must be done in certain conditions:
Do not use gloves Use a clean finger Touch the glass (smooth touching)
Before using for the first time