Malloca MDH-02I, Инструкции по эксплуатации и монтажу

Страница: 11 / 72

11
To eliminate the risk of burns or fire by reaching over heated surfaces cabinet
storage space above the hob should be avoided. If cabinet storage is necessary,
the risk can be reduced by installing a venting hood to project horizontally a mini-
mum of 127mm beyond the bottom of the cabinets.
Because of the heat radiated it is not recommended to install the hob above a
drawer. It should be installed above a cabinet base unit with a dummy drawer
front. A protective base should also be installed between the dummy drawer and
the hob. There must be a minimum distance of 110 mm between the top of the
countertop and the top of the protective base to ensure proper ventilation.
This hob has not been designed for maritime use or for use in mobile installa-
tions such as recreational vehicles or aircraft. However, under certain conditions
it may be
possible for installation in these applications. Please contact the Malloca Techni -
cal
Service Department with specific requirements.
The hob must not be permanently sealed into the countertop when installed. The
sealing strip under the edge of the hob provides a sufficient seal for the counter -
top.
Once installed, be sure that the power cord cannot come into contact with the
underside of the hob or any mechanical parts.
Important Safety Instructions