2021 OWNER’S MANUAL | Dashes & Video Screens
63
TXi Standard Gauges and Screen
Functionality is explained in this section. Additional
information about certain aspects of the controls is also
discussed in further detail in other sections of this manual. Be
sure to read the entire manual before attempting to operate the
controls.
Gauges
The TXi Standard Instrument Panel features two (2) five-
inch (5”) gauges, which provide real-time information about
important drive train functions. These are smart gauges that
read information that is broadcast on the communication
network by the Engine Control Module (ECM).
The Left Gauge is the Speedometer, which shows the boat’s
speed as determined by the Paddlewheel mounted thru the Hull
or by a GPS unit. The speed reads in miles per hour (MPH) or
kilometers per hour (kph), depending
on which is selected from the Factory.
There are two smaller gauges
that are built into the Speedometer.
The gauge in the lower left of
the Speedometer is the Engine Coolant
Temperature. The gauge in the
lower right of the Speedometer is
the Engine Oil Pressure.
The Right Gauge is the Tachometer, which shows the Engine’s
rotational speed in revolutions per minute. There are two smaller
gauges that are built into the Tachometer. The gauge in the lower
left of the Tachometer is the Battery Voltage. The desired range
during engine operation is above 12
volts. See the battery information that
follows in this section of the Owner’s
Manual for additional details regarding
the proper charging and battery switch
designation. The gauge in the lower
right of the Tachometer is the Fuel
Level. Note that movement of the boat
can affect the reading, especially as the
fuel level decreases. Be certain to read the
Fueling
information in
the
Get Ready
section of this manual before operating the boat
for important information.
TXi Standard Dash InfoCenter
The TXi Standard Dash InfoCenter is located to the
right of the Steering Wheel, mounted to a billet plate.
The InfoCenter is an LCD screen that provides information on
much of the boat’s functionality. The following information
provides more detail about the information that is displayed on
the InfoCenter.
InfoCenter Screens
Vessel Screen
The Vessel Screen will show the Driver the following
information.
Vessel Speed -
The Vessel Speed can be shown in either Miles
per Hour or Kilometers per Hour. This can be changed by
accessing the Settings page and changing the Units.
Throttle Position -
The Throttle Position will show the
driver the current position of the Throttle that the Engine is
receiving.
Cruise Control Status -
The Cruise Control Status will show
the Driver when Cruise Control is Off, Enabled, or Engaged. It
will also provide the Driver with suggestions for Throttle Input.
Cruise Control Set Speed -
The Cruise Control Set Speed
will be shown even when Cruise Control is not enabled.
To change the Cruise Control Set Speed, please reference
the Accessory Keypads section below.
Time -
The Time is based on the Zero-Off GPS Puck installed
into the vessel.
Engine Hours Screen
The Engine Hours screen will show the Driver the following
information.
Engine Hours -
The Engine Hours will let the Driver know
how many hours the Engine has been run.
Time -
The Time is based on the Zero-Off GPS Puck
installed into the vessel.
Temperature Screen
Water Temperature -
Water Temperature is read from the
Paddlewheel.
Air Temperature -
Air Temperature is read from the Sensor
built into the Dash Harness.
Cardinal Direction and Time -
The Cardinal Directions and
Time are based off of the Zero-Off GPS puck installed into the
vessel.
Settings Screen
For the Driver to access the Settings Screen, they will need to
use the Navigation Keypad and press the Gear icon. Pressing the
Enter key on the Navigation Keypad will bring you to the Settings
Menu.
The Settings Menu has the following
pages.
Units
Allows the Driver to select either
English or Metric.
Paddlewheel GPS
Allows the Driver to select either
Paddlewheel or GPS as the Speed Source.
Time Offset
Allows for offset of displayed time.
Default time is based off GMT.
Auto Volume
Adjust the loudness setting of the
AUTO VOLUME.
Auto-Volume is based off of the Engine
RPM.
Night Mode
Adjust the brightness of the LCD
display. The display and gauges will dim to
this level whenever the interior, navigation
or anchor lights are on.
Shallow Alarm
Adjust the depth of the SHALLOW
Содержание M240 2021
