manualshive.com logo in svg

Malibu Boats Boat, Руководство пользователя, Страница: 156 / 206

Поделиться
Скачать
Malibu Boats Boat Скачать руководство пользователя страница 156

2-90

Compass

From the Navigation Menu screen press the
LEFT arrow to change the highlight to
COMPASS.  This will change the top three
options in the menu to the screen below. 

POI NOTIFY (ON/OFF) — Indicates when you
are near a Point Of Interest on the map. 

TRACK TRAIL (ON/OFF) — Will leave a trail
in the direction of where your last waypoint was. 

ADJUST NOTIFY BAND — Pressing the
UP/RIGHT arrow brings up a box that allows the
setting of the notify distance to the next POI. 

When “NAV BY” is set to COMPASS mode, the
MAP screen will show the image to the left
which shows the compass rotating with the
heading always at the top of the screen. This
option also shows the Course name, Next
Waypoint, Destination and distance to (POI)
Point Of Interest.

 Chapter 2_15.qxp_ Chapter 2 doc.qxd  6/30/14  3:08 PM  Page 90

Содержание Boat















































































































































































































Отзывы:

Нет отзывов