Malibu Boats Boat Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 206

Malibu Boats Boat Скачать руководство пользователя страница 108

2-42

Pressing the BILGE button will toggle the POWER module output and MUX
display from OFF to ON and back to OFF again.

Pressing the BLOWER button will toggle the POWER module output and MUX
display from OFF to ON and back to OFF again.

Pressing the DASH LIGHTS button will toggle the POWER module output and
MUX display from OFF to ON to DIM 1 to DIM2 and back to OFF again. DIM 1
and 2 are two lower levels of brightness for the dash. DIM2 will also turn off the

MaliView screen on boats with this option.
Pressing the INTERIOR LIGHTS button will toggle the POWER module output
and MUX display from OFF to ON to DIM 1 to DIM2 and back to OFF again.
DIM 1 and 2 are two lower levels of brightness for the boat.

Pressing the NAV/ANC LIGHTS button will toggle the POWER module output
and MUX display from OFF to NAV/ANC ON to NAV ON and back to OFF

Pressing the HEATER button will toggle the POWER module output and MUX
display from OFF to HIGH to LOW and back to OFF again.

Pressing the MLS LEFT button will toggle the POWER module output and MUX
display from OFF to FILL to OFF to DRAIN and back to OFF again.

Pressing the MLS RIGHT button will toggle the POWER module output and
MUX display from OFF to FILL to OFF to DRAIN and back to OFF again.

Pressing the MLS CENTER button will toggle the POWER module output and
MUX display from OFF to FILL to OFF to DRAIN and back to OFF again.

Pressing the MLS FRONT button will toggle the POWER module output and
MUX display from OFF to FILL to OFF to DRAIN and back to OFF again.

Pressing the TOWER LIGHTS button will toggle the MINI MMDC module out-
put and MUX display from OFF to FRONT to ALL and ba
The ignition must be on for this to function.

ck to OFF again.

Pressing the DOCKING LIGHTS button will toggle the POWER module output
and MUX display from OFF to ON and back to OFF again.

Pressing the POWER WEDGE UP button will toggle the

The AUX OUTPUT icon will toggle on and off a 12-volt source on the POWER module.

This is intended to drive a relay for controlling things like on/off power for amps and

other devices.

The output is located in position #1 on the POWER module.

POWER module output

to supply power to the WEDGE to move it up. The WEDGE will move up as long
as this button is pressed and the boat is moving faster than .3 mph.

Pressing the POWER WEDGE DEPLOY button will toggle the MINI to move
the WEDGE to its down position. This is done automatically once the button is
pressed. The POWER module will turn off after it has reached the bottom or 10
seconds has elapsed.

Pressing the POWER WEDGE DOWN button will toggle the POWER module
output to supply power to the WEDGE to move it down. The WEDGE will move
down as long as this button is pressed.

Chapter 2_15.qxp_ Chapter 2 doc.qxd 6/30/14 3:06 PM Page 42

«
...
106
107
108
109
110
...
»

Содержание Boat















































































































































































































Отзывы:

Нет отзывов