Malibu Boats Boat Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 206

Malibu Boats Boat Скачать руководство пользователя страница 111

2-45

Throttle Control

The throttle lever is located to the right of the driver
(Figure 2-19). When the throttle lever is vertical, it is in the
NEUTRAL position. The throttle lever is equipped with a
neutral shift lock activation button. Depressing the neutral shift
lock activation button and lifting up on the safety collar
disengages the transmission, thereby allowing use of the throttle
without engaging the transmission. This is used for warm-up of
the engine in NEUTRAL. The throttle control is equipped with
an indicator light that illuminates when the neutral shift lock is
engaged.

Be sure to position the throttle vertically (in NEUTRAL), before re-engaging the transmission,
by depressing the neutral shift lock activation button.

Do not shift from forward to reverse at high RPMs; damage to
the transmission will result. When shifting from forward to
reverse you must stop in the NEUTRAL position, doing this
allows the engine to run in its idle position before moving into
the opposite gear. Moving the shift lever from FORWARD to
REVERSE without stopping in NEUTRAL can cause the
transmission to “slam” into gear, damaging the transmission
and/or causing the engine to shut off. This will cause
temporary loss of boat control which can cause damage
and/or injury to the boat and/or persons in or around the boat.

Before starting the engine or engaging transmission, ensure
all swimmers are out of the water.

Electronic Throttle Control (ETC)

All current Malibu Boats are equipped with electronic throttle control. The helm throttle
control “E-MV3” is now dual, variable voltage potentiometer that sends electronic signals
back to the engine ECM via a shielded wire harness with the highest quality water-tight
connectors that mates to the engine ECM. The ECM then uses the signals from the E-MV3
to precisely control the engine speed with an electronic throttle body. Do not make any
modifications to the throttle control to ensure proper operation.

!

WARNING

!

WARNING

Figure 2-19. Throttle Lever

Chapter 2_15.qxp_ Chapter 2 doc.qxd 6/30/14 3:06 PM Page 45

«
...
109
110
111
112
113
...
»

Содержание Boat















































































































































































































Отзывы:

Нет отзывов