RANDOMIZING
MALEKKOHEAVYINDUSTRY.COM
RANDOM:
Inserting an external gate input
will start seeding random gates and CV per
an entire preset of gate sequences as well
as an entire bank.
To adjust the amount of randomization
of gates within an entire preset
, insert a
gate signal into the RND jack,
hold
the
BANK button and select the PROBABILITY
button. You should see both buttons
flashing. Now you can select the the
amount of random probability by pressing
GATE buttons 1 thru 10 (10 being the
greatest amount of probability). You should
see all of the gate channel LEDs light up
with random gates if you’ve selected 10.
You can leave your external gate input and
move on to another preset, therefore
randomizing your entire BANK
of presets
if you wish. Or you can remove the external
gate source to stop randomization. If you
want to leave your external gate connected
but FREEZE randomization (turn it on or off
essentially), you will need to connect an
external gate source. More info about
FREEZE on PG. 13.
HINT:
To quickly take advantage of some
“under the hood” logic we’ve already built
into this feature, connect GATE 1 to a kick,
GATE 2 to a snare and GATE 3 to hi-hats.
DIVIDE/MULTIPLY
SEQ LENGTH
SEQ MODE
KEY
ROOT
ROOT + 1
ROOT + 2
ROOT + 3
ROOT + 4
ROOT + 5
ROOT + 6
ROOT + 7
ROOT + 8
ROOT + 9
ROOT + 10
VARIGATE 8+
CLK IN
CLK OUT
TRACK
RESET
PROB
CLEAR
MUTE
RPT
DLY
PW
GLIDE
SONG
FREEZE
RND
TEMPO
GATE 1
NOTE
END
SAVE
GATE 3
RECALL
GATE 2
GATE 5 GATE 6
GATE 4
GATE 8
GATE 7
CV 2
CV 1
BANK/ALL
ROOT + 11
B
A
G
F
E
D
C
PG. 12
VARIGATE 8+ MANUAL V.2
To disable randomization on a given
channel, please see pg.14,
MUTE PAGES.
