LFO & MODULATION
1 LFO RATE CONTROL
Controls LFO speed from minimum to maximum speed.
2 LFO DELAY CONTROL
The DELAY SLIDER will control the amount of time between a note or a key press and when the LFO ramps up to its full amplitude.
When SYNC is OFF, delay range is approximately
20ms to ~3 seconds.
3 LFO WAVEFORM SWITCH
Selects the LFO waveform shape. RAMP wave, SINE wave, SQUARE wave, and RANDOM are all available as modulation shapes.
Additionally, there is a switch to invert the ramp wave into a sawtooth wave.
4 INVERT LFO RAMP SWITCH (SAWTOOTH)
Set #3 switch to the top setting, then adjust this RAMP switch (#4) .
5 LFO SYNC ON/OFF
Press to turn on LFO sync (LFO syncs to BPM).
LFO
The LFO can modulate the VCO, SQUAREWAVE PULSEWIDTH, VCF and DELAY (see MENU to assign LFO to modulate DELAY).
You can access additional LFO parameters in the MENU > LFO:
PHASE
adjust the starting phase of the LFO: 0=ZERO PHASE. You can adjust this up to 100.
KEY SYNC
set to ON resets the LFO start point when a note is played. OFF is default.
LFO TO DELAY:
MENU > DELAY > LFO > DELAY
: Now select 0-100 to apply LFO modulation
to the DELAY TIME.
5
