Malekko MANTHER Скачать руководство пользователя страница 15

Страница: 15 / 19

SONG MODE

SONG MODE is used for playing presets automatically, thus creating a song. It can be comprised of all presets within all 4 banks.

SONGS can be programmed in two ways: Hold down the SONG button while selecting presets. You can select a preset to repeat by

pressing that button multiple times. To play your newly programmed song, you must then press the SONG button so it is lit and then

press the START/STOP button to start playback. You can also build songs from multiple banks of presets hold SHIFT + SONG MODE.

You will now be able to program the following:

Use the MENU and TEMPO/BACK encoders (push down and rotate) to navigate through the SONG MODE features. Once you have

programmed the BANK/PRESET for SONG PART 01 and the amount of times you want this preset to repeat, you will be prompted

to ADD another part. Press the MENU encoder down to ADD the a new SONG PART (02) will appear and so forth.

REPRESENTS THE SONG PART

01 A01 X01 add/remove

untitled

500

ADD OR REMOVE THAT PART

REPRESENTS THE BANK

(A-D) AND THE PRESET

THAT WILL PLAY WITHIN

THAT BANK (1-16)

REPRESENTS THE AMOUNT OF

TIMES/REPITITIONS YOU WANT

THIS PRESET TO PLAY WITHIN

THE SONG (1-32)

01 A01 X01
02 A01 X01 add

untitled

500

If you want to REMOVE a part that you’ve added to the song, scroll to the part you want to remove, press the MENU encoder until

you get to ADD and then turn the MENU encoder so that instead of ADD, you see REMOVE. Then press MENU again.

If you want to remove a part that you’ve added to the song, scroll to the part you want to remove, press the MENU encoder until you

get to ADD and then turn the MENU knob so that instead of ADD, you see REMOVE. Then press the MENU button again. That part

will now be removed from the song.

To EXIT SONG MODE in the menu, press SHIFT.

A02 X01

02 b01 X02 REMOVE
03 A01 X01

untitled

500

To SAVE a newly programmed song to it’s own ﬁle for future recall, HOLD SAVE + SONG. You can add a title by using the MENU

control.

TITLE

ENTER TEXT

LOCATION S01
SAVE

SAVE SONG

Содержание MANTHER




















Результаты поиска

Содержание MANTHER

Отзывы:

Бренды по названию

Популярные бренды

Malekko MANTHER, Руководство пользователя

Результаты поиска

Содержание MANTHER

Отзывы:

Бренды по названию

Популярные бренды