Maldol DB-25-M, Руководство пользователя

Страница: 21 / 32

USER’S MANUAL 17
2. Select signaling code. Press [F] + [2] + [4] + [F] + [UP]/[DOWN] to select decode signaling code
+ [F] to save settings. (DTMF code is PC software programmable.)
3. In standby mode, press [CALL] to transmit selected DTMF code.
Transmit 2 Tone Signaling by [CALL]
1.Press [MENU] to select menu 20 OPTSlG, then press [F] to select 2 Tone on.
2. Press [MENU] to select menu 24 S—lNFO. then press [F] to select preeprogrammed signaling
from groups (1-16). (2 Tone use purpose is PC software programmable.)
3. Radio will activate corresponding function when matched 2 Tone signaling received.
4. In standby mode, press [CALL] to transmit 2 Tone signaling code.
5 Tone signaling Setup
The radio is configured with 5 Tone function, which is programmable by PC software. When
receiving matched 5 Tone signaling which is same as programmed identity code ( must be five
digits), radio will ring and display corresponding signaling code. Radios can communicate with
each other in valid time. (Identity code is PC software programmable.
Press [CALL] to transmit 5 Tone signaling code.
1.Press [MENU] to select menu 20 OPTSIG, then press [F] to select 5 Tone on.
2. Press [MENU] to select menu 24 S-INFO, then press [F] to select pre-programmed signaling
from groups (1-16). (5 Tone use purpose is PC software programmable, each time can transmit
3 groups 5 Tone maximum as per requests.)
3. In standby mode, press [CALL] to transmit 5 Tone signaling code.