Maldol DB-25-M, Руководство пользователя

Страница: 18 / 32

MALDOL DB-25-M 14
Press [F] + [4] + [2] + [F] + [UP] to select desired repeater signaling tone + [F] to store. Press [PTT] +
[CALL] to emit pre-programmed repeater signaling tone.
PTT-lD Setting
PTT-ID code is pre-programmed by PC software.
1. Reter to menu 20 to select the desired signaling. Press [F] + [2] + [0] + [F] + [UP]/[DOWN] to select
desired sig [F] to save the settings.
2. Refer to menu 22 to set PTT transmit time. Press [F] + [2] + [2] + [F] + [UP]/[DOWN] to select PTT-
ID
3. transmit time + [F] to save the settings.
4. Refer to menu 23 to select PTT transmit time. Press [F] + [2] + [3] + [F] + [UP]/[DOWN] to select
delete time + [F] to save the settings.
5. Press [PTT] to send the programmed ID code.
Optional Signaling Setup
DTMF Signaling Setup
This radio is capable of DTMF encode/decode feature. User can program the desired DTMF code by PC
program.
DTMF Signaling
If the radio is pre-programmed with DTMF signaling code, when it receive a matched code it will alert
and display the corresponding code, also radios van communicate with each other in valid time. (ID
code is programmable by PC software.)