manualshive.com logo in svg

Malco FasGroov FGVK, Руководство пользователя, Страница: 6 / 17

Поделиться
Скачать
Malco FasGroov FGVK Скачать руководство пользователя страница 6

Hand Tool blade  

height adjustment:

FASGROOV #1 TOOL

Push the FasGroov #1 Tool along the left edge of a test 
piece of ductboard. Measure the depth of cut of the 
female shiplap groove, it should be half the thickness 
of the ductboard (see illustration).

If adjustment is needed: (1) Turn the blade adjustment 
knob counterclockwise to lower the blade for a deeper 
cut or (2) Turn the blade adjustment knob clockwise to 
raise the blade for a shallower cut. Repeat adjustment 
until the proper depth of cut is achieved.

FASGROOV #2/4 and #3 

TOOLS

Push the FasGroov #2/4 Tool and FasGroov #3 Tool 
through a test piece of ductboard. Measure the amount 
of fiberglass remaining between the foil backing and 
the deepest part of the shiplap cut (see illustration).

If adjustment is needed: (1) Turn the blade adjustment 
knob counterclockwise to lower the blade for a deeper 
cut or (2) Turn the blade adjustment knob clockwise to 
raise the blade for a shallower cut. 

Repeat adjustment until the proper depth of cut  
is achieved.

#1 TOOL

FGV1

FGL1

Adjustment
knob

Blade

1”

1-1/2”

1/2”

3/4”

1/16”

FGV24

1/16”

FGV3

1/8”

FGL24

1/8”

FGL3

1”

1-1/2”

1”

1-1/2”

  #2/4 TOOL  

   #3 TOOL

#1  #2/4 

#3 #2/4

#1

10

11

Содержание FasGroov FGVK


















Отзывы:

Нет отзывов