Use #6 Tool
to shorten
length of
duct section,
by measuring
from outside
edge of material
to be scrapped.
Use knob under
handle to raise
or lower blade
and adjust
depth of cut.
• 1” FasGroov kits also include a #6 tool (Tan color
coded FGV6) for creating duct sections less than
standard 4 foot lengths. The #6 replaces a shiplap
knife for making a shiplap groove at fitting end
prior to closure of duct section. The #6 may also
be used for two-piece and four-piece ductboard
fabrication.
1/2”
FGV6
FGV6
Easy one-piece layout:
•
FasGroov Square permits fast and accurate
layout without marking cuts or calculating
add-on dimensions.
Lay out ductboard as you
cut. Simply align dimension on FasGroov Square
with right edge of previous cut and move across
the board. Square is also easily adjustable for
angled cuts.
Single blade knives:
•
Single blade FasGroov Knives are safer to
use and also feature comfortable molded
handles.
Male and Female Shiplap Knives can
be used on closed duct sections.
FGK
Duct Knife
use this point to
cut fiberglass without
tearing ductboard skin.
6
7
